Panasonic KX-NS300, Pc Programming Manual

Page: 272 / 752

ISDN CO
Parameters for ISDN CO are not applicable for the BRI extension port.
The
Shelf , Slot , and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot .
Name Description Value Range Links
Port Type Selects the port type.
Each ISDN connection in a
QSIG network must have a
master port on one PBX and a
slave port on another PBX.
ISDN extensions can belong to
an incoming call distribution
group or idle extension hunting
group. In this case, an MSN
can be assigned. CO: For connecting to
public network
Extension: For connecting
to extension
QSIG-Slave: For
connecting to private
network (slave port)
QSIG-Master: For
connecting to private
network (master port)
Connection Indicates the port status. To
change the status of the port,
click the desired cell in the
column, and then select
INS or
OUS for the port.
This option is only available in
On-line mode.
INS: The port is in service.
OUS: The port is out of
service.
Fault: The port is not
communicating with the
network.
Subscriber
Number Specifies the number used as
the CLIP number. Max. 16 digits (consisting
of 0–9, *, and #) Feature Manual
References
4.1.2.2 Calling/
Connected Line
Identification
Presentation (CLIP/
COLP)
Ringback
Tone to
Outside
Caller Enables the PBX to send a
ringback tone to an outside
caller when the network cannot
send the tone. Disable, Enable
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
272 PC Programming Manual