Panasonic KX-NS300, Pc Programming Manual

Page: 386 / 752

A maximum of 4 CLIP Modification Tables can be programmed. Select the desired table from the
Modification Table list.
Name Description Value Range Links
Removed
Number of
Digits Specifies the number of
leading digits to be
removed from the
incoming caller’s
number for each type of
network numbering
plan. 0–9
PC Programming Manual References
9.27 PBX Configuration—[1-1] Configuration—
Slot—Port Property - PRI Port—Calling Party
Number—Type of Number—Public, Private
9.27 PBX Configuration—[1-1] Configuration—
Slot—Port Property - PRI Port—Called Party
Number—Type of Number—Public, Private
Feature Manual References
2.19.1 Caller ID
Added
Number Specifies the number to
be added to the
incoming caller’s
number in the place of
the removed digits for
each type of network
numbering plan. Max. 4 digits
(consisting of
0–9, *, and #) PC Programming Manual References
9.27 PBX Configuration—[1-1] Configuration—
Slot—Port Property - PRI Port—Calling Party
Number—Type of Number—Public, Private
9.27 PBX Configuration—[1-1] Configuration—
Slot—Port Property - PRI Port—Called Party
Number—Type of Number—Public, Private
Feature Manual References
2.19.1 Caller ID
11.1.4 PBX Configuration—[3-1-4] Group—Trunk Group—
Dialling Plan
The PBX sends all of the dialled digits at once after an extension user completes dialling. The PBX can
recognise the end of dialling when the dialled telephone number starts with the programmed dial (32 digits)
and contains the programmed total number of digits.
When the PBX recognises the end of dialling to an analogue trunk, the PBX cancels the muting of the
caller’s voice sent to the analogue trunk immediately. If the PBX cannot recognise the end of dialling, the
PBX mutes the caller’s voice sent to an analogue trunk from the time at which the last digit is dialled until the
analogue trunk inter-digit timer expires.
4 tables can be programmed, each with a maximum of 50 dials (32 digits). Select the table to programme
from the
Dialling Plan Table list.
To assign a set of dials (32 digits) automatically, click Auto Assign .
11.1.4 PBX Configuration—[3-1-4] Group—Trunk Group—Dialling Plan
386 PC Programming Manual