manualshive.com logo in svg

Panasonic KX-NS1000, Manual

Share
Download
Panasonic KX-NS1000 Manual Download Page 518

•

Up to 2 SNMP managers can be assigned.

•

This PBX supports SNMP Protocol Version 1.0, 2.0c and SNMP Version 1.0-TRAP.

•

This PBX can only receive read-only MIBs. Write MIBs are not supported.

•

This PBX supports MIB II.

•

For more information regarding major and minor alarms, refer to the Installation Manual.

•

For a list of the MIB object groups supported by this PBX, refer to 6.4  Supported Management Information
Base (MIB) Table in the Appendix.

•

Through system programming, it is possible to select whether each type of TRAP (e.g., ColdStart) is sent
to the SNMP manager or not.

Installation Manual References

7.1.6  Troubleshooting by Error Log

PC Programming Manual References

28.3.3  Network Service—[3-3] Client Feature—SNMP Agent

Feature Guide References

5.6.4  Local Alarm Information

518

Feature Guide

5.6.5 Simple Network Management Protocol (SNMP) System Monitor

Summary of Contents for KX-NS1000































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands