Panasonic KX-NS1000, Manual

Page: 227 / 542

Button Usage
Wrap-up
*1
Used to switch the Wrap-up/Not Ready and Ready modes.
System Alarm Used to confirm a PBX error. Also, pressing the System Alarm button
displays the current One-look network status.
Time Service
*1
Used to switch the assigned time modes: day, lunch, break or night.
Also used to check the current time mode status.
Answer Used to answer an incoming call.
Release Used to disconnect the line during or after a conversation, or to
complete a Call Transfer.
Toll Restriction/Call Barring Used to change the TRS/Barring level of other extension users
temporarily.
ISDN Service Used to access an ISDN service.
Calling Line Identification
Restriction (CLIR)
*1
Used to switch between the CLIP and CLIR service.
Connected Line Identification
Restriction (COLR)
*1
Used to switch between the COLP and COLR service.
ISDN Hold Used to transfer a call using the telephone company.
Headset Used to turn on/off the headset mode while idle.
Used to switch between hands-free mode and headset modes
during a conversation.
Time Service Switching Mode
(Automatic/Manual)
*1
Used to switch between the Automatic Switching and Manual
Switching mode.
Two-way Record Used to record a conversation into your own mailbox.
Two-way Transfer Used to record a conversation into the mailbox of a specified
extension.
One-touch Two-way Transfer Used to record a conversation into the mailbox of a specified
extension with one touch.
Live Call Screening (LCS) Used to monitor your own voice mailbox while an incoming caller is
leaving a message and, if desired, intercept the call.
Voice Mail (VM) Transfer Used to transfer a call to the mailbox of a specified extension. Also
used to access the Unified Messaging system (
®
3.2 System and
Subscriber Features) or the voice mail features of a VPS (DPT
integration only).
Check-in Used to switch the status of extensions from Check-out to Check-in.
Check-out Used to switch the status of extensions from Check-in to Check-out.
Cleaned-up Used to switch the room status of extensions between Ready and
Not Ready.
CTI Used to access CTI features.
Primary Directory Number (PDN) Used to make and receive both outside and intercom calls.
(
®
2.9.1 Primary Directory Number (PDN)/Secondary Directory
Number (SDN) Extension)
Feature Guide 227
2.21.2 Flexible Buttons