Panasonic KX-NS1000, Manual

Page: 395 / 542

•
To establish a QSIG network (
®
4.3.4 QSIG Standard Features), each ISDN (QSIG) connection in a TIE
line network must have the port on one PBX assigned as a master port, and the port on the other PBX
assigned as a slave port. PBXs that support this feature are KX-NS1000 PBXs, and KX-NCP series,
KX-TDE series, and KX-TDA series PBXs.
[TIE Line Network Connection Example]
PBX-1
PBX-3
PBX-2
Extn.1000
:
Extn.1999
Extn. 2000
:
Extn. 2999
(A) Master
(B) Master
(C) Master
QSIG Network
(A) Slave
(C) Slave
(B) Slave
Extn. 3000
:
Extn. 3999
•
When a TIE line call arrives at a busy extension which has disabled Call Waiting, the caller will hear a busy
tone. If required, Intercept Routing—Busy/DND can be activated.
•
The Inter-digit time can be assigned for TIE line calls.
®
10.3 PBX Configuration—[2-3] System—Timers & Counters—Miscellaneous— Incoming Call
Inter-digit Timer—TIE
PC Programming Manual References
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
→GW Settings–Main
→DN2IP
9.12.2 PBX Configuration—[1-1] Configuration—Slot—Shelf Property - Virtual IP Gateway—Hunt Pattern
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port—Network Numbering Plan—
Trunk Property
9.28 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port—Network Numbering Plan—
Trunk Property
10.3 PBX Configuration—[2-3] System—Timers & Counters—Miscellaneous—
Incoming Call Inter-digit
Timer—TIE
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features
→ Idle Line Access (Local Access)
→ Trunk Group Access
→ TIE Line Access
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Other PBX Extension
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—TRS—
TRS Level—Day,
Lunch, Break, Night
10.9 PBX Configuration—[2-9] System—System Options—Option 4—
Private Network—TIE Call by
Extension Numbering
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings—Main—
COS
17.1 PBX Configuration—[9-1] Private Network—TIE Table
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
→DIL— Trunk Property
→DIL— DIL Destination—Day, Lunch, Break, Night
→DDI / DID / TIE / MSN
Feature Guide 395
4.3.1 TIE Line Service