manualshive.com logo in svg

Panasonic KX-NS1000, Manual

Share
Download
Panasonic KX-NS1000 Manual Download Page 371

4.2.3.3  UM Group Failover

Description

Each UM group can be assigned a failover destination. If a call is routed to a UM group that is unavailable, the
call will be redirected to the specified UM group.

PBX

PBX

UM Group 1

Failover Group: 3

UM Group 2

PBX

UM Group 3

Offline

Incoming Call

UM group failover applies to incoming trunk calls (including DISA), intercom calls, and faxes.

Conditions

•

If a call cannot be routed to a UM group and no failover UM group is specified, the system handles the call
according to Intercept Routing—No Destination (

®

 2.1.1.7  Intercept Routing—No Destination).

•

Failover redirection does not cascade; if the failover destination is unavailable, the call will not be redirected
to that UM group’s failover destination.

•

The same UM group may be specified as the failover destination for multiple UM groups. For example, UM
group 3 can be the failover destination for both UM group 1 and UM group 2.

PC Programming Manual References

11.7.2  PBX Configuration—[3-7-2] Group—UM Group—Unit Settings—

Fail Over Site Name

Feature Guide

371

4.2.3 One-look Networking Survivability

Summary of Contents for KX-NS1000































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands