manualshive.com logo in svg

Panasonic KX-NS1000, Manual

Share
Download
Panasonic KX-NS1000 Manual Download Page 336

4.1  Public Network Features

4.1.1  SIP (Session Initiation Protocol) Trunk

Description

Through a V-SIPGW card, the PBX can connect to an Internet telephony service provided by an ITSP (Internet
Telephony Service Provider).
An ITSP provides its telephony service partly through the conventional telephone network (e.g., ISDN and
Mobile), which is fee-based. An ISP (Internet Service Provider), which can also act as a SIP provider, does
not provide the telephone connection itself. However, providing its users with Internet access, an ISP provides
voice communication on the Internet for free. In this way, with VoIP technology based on the SIP protocol, the
cost of voice communication can be much cheaper than conventional telephone networks.

PC

LAN

(Local Area Network)

WAN (Wide Area Network)

Internet

Local

Telephone

IP-PT

ISP

ITSP

Router

Built in  
Router

*1

Switching

Hub

V-SIPGW16

PBX

*1

When the PBX is connected to an ISP and the built-in router is used, the router connected to the switching hub is not required.

Conditions

•

A subscription with an ISP is required for an Internet connection.

•

A subscription with an ITSP is required for a telephone connection. The ISP and ITSP may be part of the
same company.

336

Feature Guide

4.1.1 SIP (Session Initiation Protocol) Trunk

Summary of Contents for KX-NS1000































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands