Panasonic KV-SS905C Reference Manual Download Page 74

Page: 74 / 158

3.22 Chroma

This function is used to adjust the color scanning hue.

IMPORTANT NOTE:
•

This function is effective only for color images in the Color mode or MultiStream
mode.

•

This function is effective only when None has been selected by Color Matching.

ISIS configuration method

Use the mouse to click and move the [Chroma] slider bar in the [Advanced
Settings] dialog box.

When the [Chroma] slider bar is moved to the right, the colors become more
vivid; when it is moved to the left, they become grayer.

If different settings are to be used for the front and back sides with Both
scanning, select [Front] or [Back] in the [Select Setting Side] section, and then
operate the slider bar.

S7065C

Summary of Contents for KV-SS905C































































































































































Search results

Summary of Contents for KV-SS905C

Reviews:

Related manuals for KV-SS905C

Brands by name

Popular brands

Panasonic KV-SS905C, Reference Manual

Search results

Summary of Contents for KV-SS905C

Reviews:

Related manuals for KV-SS905C

Brands by name

Popular brands