129
Min Angle
Input the minimum angle of the skew to be detected. The angle is measured in
0.1 degree increments. If setting the angle for 25 degrees, enter 250. (Setting
range: 0 to 449)
Normally, satisfactory results are achieved when “1” is set.
Max Angle
Input the maximum angle of the skew to be detected. The angle is measured in
0.1 degree increments. If setting the angle for 25 degrees, enter 250. (Setting
range: 0 to 449)
Detection Area (%)
A percentage of the image area used for detection is specified here. Normally,
satisfactory results are achieved when “80” or more is set.
IMPORTANT NOTES:
•
A percentage of the (text and/or graphic) area used for detection is specified in the
Detection Area (%). Setting a high percentage will increase the processing time.
•
Depending on the images to be scanned, the Deskew function may not work
properly.