Panasonic HC-X1, Operating Instructions Manual

Page: 69 / 234

- 69 -
Gain adjustment
≥
Use the jog dial to change the settings.
≥
Switch to Manual Mode. ( l 44 )
1
Press the GAIN button to switch to [LOW GAIN], [MID GAIN], or [HIGH GAIN].
≥ The setting changes each time you press the button.
[LOW GAIN]
# [MID GAIN] # [HIGH GAIN]
≥ It is possible to register gain values to [LOW GAIN], [MID GAIN], and [HIGH GAIN] and switch
between these values. (
l 168 , 169 )
≥ It is also possible to switch to the desired gain value by pressing the USER button to which
[LOW GAIN], [MID GAIN] or [HIGH GAIN] is registered. (
l 105 )
2
Push the jog dial.
3
Adjust the gain by rotating the jog dial.
Gain value:
0 dB to 24 dB
≥
Value closer to 0 dB darken the image.
≥ Value closer to 24 dB brighten the image.
≥
When [EXTENDED SENSITIVITY] is set to [ON], you can set a value between -3 dB and 24 dB.
(
l 165 )
≥
The selected gain value is not maintained if any of the following operations is performed:
j Pressing the GAIN button
j
Switching to Auto Gain Mode
j Switching to Infrared Recording Mode ( l 92 , 183 )
≥
Auto Gain Mode is activated when one of the following operations is performed:
j Setting [AGC] to [ON] and switching to Auto Mode
(
l 44
)
j
Setting [LOW GAIN], [MID GAIN] or [HIGH GAIN] to [AUTO] and then pressing the GAIN
button to switch to the applicable gain setting.
1
Jog dial
2
GAIN button
A
Gain value
≥
In Auto Gain Mode, “AGC” is displayed; in Manual Gain Mode, the gain value is displayed in dB.
B
[GAIN]
ヴユロバ
ヱヶヴラ
ヴユヵ
GAIN



0dB

HC-X1_GD_DVQP1183ZA_eng.book 69 ページ ２０１６年１１月２８日 月曜日 午前１１時４４分