Panasonic HC-X1 Operating Instructions Manual Download

Page: 211 / 234

- 211 -

CANNOT COPY - DATE
CAPACITY IS FULL.

This is displayed when no
more scenes can be copied
after the maximum limit set by
applicable standards is
reached, for example.

≥

Use an SD card with enough
recordable space.

CANNOT COPY - THE
NUMBER OF SCENES
HAS REACHED
MAXIMUM.

COULD NOT COPY
SOME SCENES.

This is displayed when some
scenes cannot be copied after
the maximum limit set by
applicable standards is
reached, for example.

COPY FAILED. PLEASE
CHECK THE CARD.

An error has occurred while
accessing the SD card.

≥

Check the SD card.

Cannot copy due to error
on media.

This is displayed when an
attempt to access the SD card
in this unit fails.

Cancel card lock to write
information.

The write-protect switch of the
copy destination SD card is
locked.

≥

Unlock the write-protect switch
of the SD card.

During wireless LAN connection

Display

Description

Behavior and cause

Connection to wireless
access point failed.

This is displayed when a
connection to the wireless
access point cannot be
established.

≥

Check the settings for [WIRELESS
SETUP] and [Wireless LAN setup],
and the settings on the wireless
access point.

Display

Description

Behavior and cause

HC-X1_GD_DVQP1183ZA_eng.book 211 ページ２０１６年１１月２８日　月曜日　午前１１時４４分

Summary of Contents for HC-X1











































































































































































































































Search results

Summary of Contents for HC-X1

Reviews:

Related manuals for HC-X1

Brands by name

Popular brands

Panasonic HC-X1, Operating Instructions Manual

Search results

Summary of Contents for HC-X1

Reviews:

Related manuals for HC-X1

Brands by name

Popular brands