Panasonic HC-X1 Operating Instructions Manual Download

Page: 207 / 234

- 207 -

CANNOT RECORD
- DATE CAPACITY IS
FULL.

This is displayed when you try to
record in excess of the maximum
number of scenes allowed for one
SD card.

≥

The operation will stop.

≥

Replace the SD card or
delete unnecessary
scenes.

Cannot record
- Playlist capacity is full.

INVALID

This is displayed when the operation
is invalid.

≥

Before performing the
operation, wait until this
unit is ready for it.

ERROR
- UNABLE TO REPAIR
DATA.

This is displayed when the
management information cannot be
recovered.

≥

Check the SD card.

CANNOT USE SD CARD
IN VIDEO MODE,
CONTROL DATA ERROR.

≥

The operation will stop.

≥

Use another SD card to
perform recording.

CONTROL DATA ERROR
HAS BEEN DETECTED.
(SD CARD)

Defective management information
has been found.

≥

The management
information will be
automatically recovered
after this message is
displayed.

SUPER SLOW MODE NO
AUDIO RECORDING

Audio cannot be recorded if you
record using Super Slow Recording.

≥

To record audio, disable
Super Slow Recording.

VFR ON,
NO AUDIO RECORDING

Audio cannot be recorded if you
change the frame rate when using
Variable Frame Rate Mode.

≥

To record audio, disable
Variable Frame Rate
Mode.

CANNOT PLAY.

This is displayed when an error in
the recording folder name or file
name has occurred, for example.

≥

Check the SD card.

CANNOT PLAY THIS
SCENE ON THIS MODEL.

The scene cannot be played back
because it was recorded with
another device.

≥

Play back the scene with
the device with which it
was recorded.

Display

Description

Behavior and cause

HC-X1_GD_DVQP1183ZA_eng.book 207 ページ２０１６年１１月２８日　月曜日　午前１１時４４分

Summary of Contents for HC-X1











































































































































































































































Search results

Summary of Contents for HC-X1

Reviews:

Related manuals for HC-X1

Brands by name

Popular brands

Panasonic HC-X1, Operating Instructions Manual

Search results

Summary of Contents for HC-X1

Reviews:

Related manuals for HC-X1

Brands by name

Popular brands