Panasonic HC-X1 Operating Instructions Manual Download Page 193

Page: 193 / 234

- 193 -

This changes the units of focus values.

This changes the units of zoom values.

The information displayed on the screen (operation icon and counter display etc.) can be displayed/
not displayed on the external monitor. (

127

)

It is possible to change the date and time display mode.

It is possible to change the date format.

This function displays the horizontal/vertical tilt of the unit with the electronic level. (

)

[FOCUS DISPLAY]

[NUMBER]

A value between 0 and 99 is displayed.

[feet]

All values are displayed in feet.

[m]

All values are displayed in meter.

[OFF]

No value is displayed.

[ZOOM DISPLAY]

[NUMBER]

A value between 0 and 99 is displayed.

[mm]

All values are displayed in millimeter.

[OFF]

No value is displayed.

[VIDEO OUT OSD]

[ON]/[OFF]

[DATE/TIME]

[OFF]/[TIME]/[DATE]/[DATE&TIME]

[DATE FORMAT]

[Y/M/D]/[M/D/Y]/[D/M/Y]

[LEVEL GAUGE]

[ON]/[OFF]

HC-X1_GD_DVQP1183ZA_eng.book 193 ページ２０１６年１１月２８日　月曜日　午前１１時４４分

Summary of Contents for HC-X1











































































































































































































































Search results

Summary of Contents for HC-X1

Reviews:

Related manuals for HC-X1

Brands by name

Popular brands

Panasonic HC-X1, Operating Instructions Manual

Search results

Summary of Contents for HC-X1

Reviews:

Related manuals for HC-X1

Brands by name

Popular brands