Panasonic HC-X1 Operating Instructions Manual Download Page 158

Page: 158 / 234

- 158 -

To avoid overexposure, select the compression level of the high intensity video signals received
through the image sensor.

Touch [KNEE MODE].

Touch

to select the setting item.

Touch [EXIT] to exit the menu screen.

This adjusts the knee point position in 0.5% steps when [KNEE MODE] is set to [MANUAL].

Touch [KNEE MASTER POINT].

Touch

to adjust settings.

≥

You can select a value between 80.0 and 107.0.

Touch [EXIT] to exit the menu screen.

≥

The default setting that is assigned to [F1:] in [FILE SELECT] is “93.0”.

This sets the knee inclination when [KNEE MODE] is set to [MANUAL].

Touch [KNEE MASTER SLOPE].

Touch

to adjust settings.

≥

You can select a value between 0 and 99.

Touch [EXIT] to exit the menu screen.

≥

The default setting that is assigned to [F1:] in [FILE SELECT] is “85”.

Selects the DRS (Dynamic Range Stretcher) function. (

)

[KNEE MODE]

[AUTO]:

Sets the level automatically according to the signals received.

[MANUAL]:

Applies the [KNEE MASTER POINT] and [KNEE MASTER SLOPE]
settings.

[OFF]:

Disables the Knee function.

[KNEE MASTER POINT]

[KNEE MASTER SLOPE]

[DRS]

[ON]/[OFF]

HC-X1_GD_DVQP1183ZA_eng.book 158 ページ２０１６年１１月２８日　月曜日　午前１１時４４分

Summary of Contents for HC-X1











































































































































































































































Search results

Summary of Contents for HC-X1

Reviews:

Related manuals for HC-X1

Brands by name

Popular brands

Panasonic HC-X1, Operating Instructions Manual

Search results

Summary of Contents for HC-X1

Reviews:

Related manuals for HC-X1

Brands by name

Popular brands