Panasonic HC-X1, Operating Instructions Manual

Page: 159 / 234

- 159 -
Selects the level of the DRS function.
1 Touch [DRS EFFECT].
2 Touch / to select the setting item.
≥
Higher the value, greater the compression level of the highly illuminated area.
≥ Higher the value, greater the noise of the dark area.
3 Touch [EXIT] to exit the menu screen.
≥ This item is not available in the following cases:
j
During Super Slow Recording (
l
103 )
j In Variable Frame Rate Mode ( l 100 )
This enables/disables Auto Iris Level. (
l
68 )
Adjusting brightness during the Auto Iris Mode. (
l
68 )
1 Touch [AUTO IRIS LEVEL EFFECT].
2 Touch / to adjust settings.
≥ You can select a value between s 50 and r 50.
3 Touch [EXIT] to exit the menu screen.
≥
The default setting that is assigned to [F1:] in [FILE SELECT] is “0”.
You can control the noise reduction effect and afterimage intensity by adjusting the noise reduction
setting.
1 Touch [NR CONTROL].
2 Touch / to adjust settings.
≥ You can select a value between s 7 and r 7.
≥
Adjusting the setting in the minus (
s
) direction weakens the noise reduction effect, thereby
reducing afterimages. Note that this also tends to increase noise.
≥
Adjusting the setting in the plus (
r
) direction enhances the noise reduction effect, thereby
reducing noise. Note that this may also cause afterimages to appear more frequently.
3 Touch [EXIT] to exit the menu screen.
≥
The default setting that is assigned to [F1:] in [FILE SELECT] is “0”.
[DRS EFFECT]
[1]/[2]/[3]
[AUTO IRIS LEVEL]
[ON]/[OFF]
[AUTO IRIS LEVEL EFFECT]
[NR CONTROL]
HC-X1_GD_DVQP1183ZA_eng.book 159 ページ ２０１６年１１月２８日 月曜日 午前１１時４４分