Panasonic HC-X1, Operating Instructions Manual

Page: 170 / 234

- 170 -
This sets the blur amplitude of the Image Stabilizer during recording. (
l
50 )
This sets the blur frequency of the Image Stabilizer. ( l 50 )
When you press the WHITE BAL button, you can assign ATW.
This fine-adjusts the intensity of red. (
l
65 )
≥ This function’s default setting is “0”.
This fine-adjusts the intensity of blue. (
l
65 )
≥ This function’s default setting is “0”.
Sets which White Balance mode to use when the WHITE BAL button is pressed to switch to the
PRST position.
[BLUR AMPLITUDE]
[1]/[2]/[3]/[4]/[5]
[BLUR FREQUENCY]
[1]/[2]/[3]
[ATW SET]
[OFF]: Does not assign ATW when the WHITE BAL button is pressed.
[Ach]: Sets the White Balance mode to ATW when the WHITE BAL button is pressed to
switch to [Ach].
[Bch]: Sets the White Balance mode to ATW when the WHITE BAL button is pressed to
switch to [Bch].
[PRST]: Sets the White Balance mode to ATW when the WHITE BAL button is pressed to
switch to [PRST].
[ATW TARGET R]
[ATW TARGET B]
[WB PRESET]
[3200K]/[5600K]/[VAR]
HC-X1_GD_DVQP1183ZA_eng.book 170 ページ ２０１６年１１月２８日 月曜日 午前１１時４４分