Panasonic HC-X1 Operating Instructions Manual Download Page 145

Page: 145 / 234

- 145 -

∫

Configuring the wireless LAN settings (IP address, etc.)

Select the menu.

Touch and set the desired items as needed.

≥

All default settings are indicated with underlined text.

≥

If you make a connection with [WIRELESS SETUP] set to [DIRECT], the [Gateway] setting will be
disabled.

≥

[IP Address], [Subnet Mask], and [Gateway] cannot be set when [DHCP] is set to [CLIENT].

≥

[MAC Address] cannot be changed.

≥

For details on how to enter characters, refer to page

144

Touch [EXIT].

≥

A connection cannot be made unless the combination of the IP address, subnet mask, and
gateway are correct.

≥

When not using the gateway, set it to [0.0.0.0].

≥

When [DHCP] is set to [OFF] or [CLIENT], apply the [IP Address] setting to [AG ROP] in
[Settings] on the iPad. For details, refer to [CONNECTION] in Help of the AG ROP app.

: [NETWORK SETUP]

[Wireless LAN setup]

[IP Address]:

Enter the IP address.

≥

The default setting is [192.168.0.1].

[Subnet Mask]:

Enter the subnet mask.

≥

The default setting is [255.255.255.0].

[Gateway]:

Enter the gateway.

≥

The default setting is [192.168.0.254].

[DHCP]:

[OFF]:

Disables automatic retrieval by DHCP and the DHCP
server function.

[CLIENT]:

Performs automatic retrieval by DHCP when connecting
with [WIRELESS SETUP] set to [SSID(SELECT)] or
[SSID(MANUAL)].

[SERVER]:

Enables the DHCP server function when connecting with
[WIRELESS SETUP] set to [DIRECT].

[MAC Address]:

Displays the MAC address.

HC-X1_GD_DVQP1183ZA_eng.book 145 ページ２０１６年１１月２８日　月曜日　午前１１時４４分

Summary of Contents for HC-X1











































































































































































































































Search results

Summary of Contents for HC-X1

Reviews:

Related manuals for HC-X1

Brands by name

Popular brands

Panasonic HC-X1, Operating Instructions Manual

Search results

Summary of Contents for HC-X1

Reviews:

Related manuals for HC-X1

Brands by name

Popular brands