Panasonic HC-X1 Operating Instructions Manual Download

Page: 186 / 234

- 186 -

Audio Setup

All default settings are indicated with underlined text.

Reduces the level of low-pitched sound for audio channel 1.

≥

You may not see the full effect depending on the recording conditions.

Reduces the level of low-pitched sound for audio channel 2.

≥

You may not see the full effect depending on the recording conditions.

Switches the adjustment method of the audio recording level for audio channel 1. (

)

Switches the adjustment method of the audio recording level for audio channel 2. (

)

If you set this item to [ON], when ALC works for either of the audio channels, it will also work for the
other audio channel. (

)

≥

Set [AUDIO LEVEL CH1]/[AUDIO LEVEL CH2] to [MANUAL].

≥

Set [AUDIO ALC CH1]/[AUDIO ALC CH2] to [ON]. (

)

: [AUDIO SETUP]

desired setting

[AUDIO LOW CUT CH1]

[ON]/[OFF]

[AUDIO LOW CUT CH2]

[ON]/[OFF]

[AUDIO LEVEL CH1]

[AUTO]/[MANUAL]

[AUDIO LEVEL CH2]

[AUTO]/[MANUAL]

[AUDIO ALC LINK]

[ON]/[OFF]

HC-X1_GD_DVQP1183ZA_eng.book 186 ページ２０１６年１１月２８日　月曜日　午前１１時４４分

Summary of Contents for HC-X1











































































































































































































































Search results

Summary of Contents for HC-X1

Reviews:

Related manuals for HC-X1

Brands by name

Popular brands

Panasonic HC-X1, Operating Instructions Manual

Search results

Summary of Contents for HC-X1

Reviews:

Related manuals for HC-X1

Brands by name

Popular brands