2.
Attach the hand strap.
•
Pass the straps through the left and right upper strap attachment holes (
D
), pull them firmly to the
end (
E
), and then pass them through the buckles (
F
).
•
Unfold the stands (
G
), attach the straps attached in step 1 to the buckles (
H
), pull the belts firmly
(
I
), and then fold the stands (
J
).
•
To remove the hand strap, unfold the stands (
K
), and press the buckle protrusions (
L
).
Adjusting the hand strap
Open the cover, adjust the hand strap to fit your hand, fold back and fasten the belt, and then fold the cover.
•
Make sure that the ring does not go past the stopper (
A
). If it does, the belt may get detached from the
ring and the unit may fall.
•
The part where you insert your hand can be rotated.
Replacing the batteries
To replace the batteries, unfold the stands in step 2 above (
K
), press the buckle protrusions (
L
) to remove
the straps, and lift the hand strap.
Attaching the shoulder strap
You can attach the shoulder strap (CF-VNS331) to the rings of the hand strap.
Operating Instructions - Reference Manual
55
Supplementary items
