Installing and removing the batteries
•
If the cover latch is closed, open it (page 16).
Installing the batteries
1.
Insert the tabs at the battery’s terminal side into the notches of the unit (
A
), and then lower the battery
into place (
B
).
FZ-VZSUT10
FZ-VZSUT11
2.
Press down firmly on the outside edges of the battery to seal it closed.
FZ-VZSUT10
FZ-VZSUT11
3.
Close the cover latch (
A
) and lock it (
B
) by sliding the switch (circled in the illustration) toward .
•
If the gap above the latch or the red area inside the switch is visible, the latch is not properly closed
or locked.
Operating Instructions - Reference Manual
15
Getting started
