IMPORTANT
•
Observe the following to ensure the drip-proof and dustproof performance of the unit.
–
When installing the battery, make sure there is no debris lodged in the gasket of the battery and
the unit.
–
Make sure the gasket of the unit is not damaged, deformed, or peeled off.
–
Always make sure the battery is securely installed and locked.
•
Make sure to install two batteries of the same model number. Do not use batteries with different
model numbers.
Removing the batteries
•
Make sure to turn off the unit before replacing the battery.
1.
Unlock the cover latch by sliding the switch (circled in the illustration) away from (
A
), and then open
the cover latch by sliding it (
B
).
2.
Insert your fingertip into the groove (circled in the illustration), lift the battery (
A
) and then remove it
(
B
).
FZ-VZSUT10
FZ-VZSUT11
IMPORTANT
•
Do not remove the batteries while the unit is wet. When the unit is wet, remove the water by wiping
off the water droplets and thoroughly drying the unit before removing the batteries. (See
“Drip-proof/dustproof” (page 6).)
16
Operating Instructions - Reference Manual
Getting started
