109
Displaying data in graphs
Energy saving
Graphing operating times and energy usage
Specify the display period (daily, monthly, yearly), and display mainly accumulated data, such as energy
usage (electricity, gas), total operating hours, and charges (electricity, gas), in bar charts.
You can put target values in graphs (these are displayed as red lines on the graphs). Putting target values
in the graphs will help raise awareness about saving energy.
1
Touch [Energy saving mgmt] in
“EnergySaving”.
1
2
Touch [Bar chart].
z
The main screen is displayed.
2
3
Touch [GrphDspSetgs].
z
The display settings screen is displayed.
3
4
Set the display range.
(The screen shown is if “days” is selected)
Item
Explanation
Display period
(days/Mths/Yrs.)
Refer to P.106 for information about display
periods.
DspDay
DspMth
Year
Set the dates to be displayed.
y
When “days” is selected
1) Touch .
2) Select the date to display in the “Calendar”
dialogue.
The current date is displayed if you touch
[Tday].
y
When “Mths” or “Yrs.” is selected
1) Select the month or year to display with
.
The current month or year is displayed if you
touch [CuMo] or [CuYr].
X-axis
Use
to set the first and last time
or period.
y
When “days”, 00:00 to 24:00 in 1-hour steps
y
When “Mths”, 1st to 31st in 1-day steps
Data units
Indicates the units for one tick mark on the X
axis.
days: Fixed at 1 hour
Mths : Fixed at 1 day
Yrs.: Fixed at 1 month
Y-axs1 Lt
Y-axs2 Rt
Set the range of values for the axis.
If you put a check mark in “AutoAjst” the values
will be set automatically to the maximum value
and the minimum value.
If you want set the maximum and minimum
values manually, remove the check mark and
enter the values in the text box.
Continued on next page
