Panasonic CZ-256ESMC3 Operating Instructions Manual Download Page 175

Page: 175 / 230

175

Configuring the Hybrid GHP/EHP

control

Setting

Setting the mode used for operation

[Basic settings]

Set basic operation for Hybrid GHP/EHP control and set demand control.

Select the Hybrid GHP/EHP control

mode setting.

Item

Explanation

Cost priority

control

Control so that the power/gas usage

charges are kept to a minimum based

on the unit prices set in the “Cost

settings” screen.

Energy priority

control

Control so that the energy consumed is

kept to a minimum.

EHP priority

control

The system operates so that the EHP

side is prioritised, with GHP operating

only when capacity is insufficient.

GHP priority

control

The system operates so that the GHP

side is prioritised, with EHP operating

only when capacity is insufficient.

Select the demand setting.

Item

Explanation

Not set

Demand control is not performed.

EHP demand

GHP takes some of the load from EHP

according to the demand level.

GHP demand

GHP demand control instructions are

issued according to the demand level.

The instruction value can be freely

changed in the “Gas demand settings”

screen.

Continued on next page

Touch [System Settings] in “Settings”.

The “System settings” screen is displayed.

Touch [Hybrid GHP/EHP settings].

Enter the identification number (password level 1 or 2) and

the “Hybrid GHP/EHP settings” screen is displayed.

Touch [Basic settings].

The “Basic settings” screen is displayed.

Summary of Contents for CZ-256ESMC3







































































































































































































































Search results

Summary of Contents for CZ-256ESMC3

Reviews:

Related manuals for CZ-256ESMC3

Brands by name

Popular brands

Panasonic CZ-256ESMC3, Operating Instructions Manual

Search results

Summary of Contents for CZ-256ESMC3

Reviews:

Related manuals for CZ-256ESMC3

Brands by name

Popular brands