Panasonic CZ-256ESMC3 Operating Instructions Manual Download Page 194

Page: 194 / 230

194

Configuring the Hybrid GHP/EHP

control

Setting

Registering the hot water demand point

inputs

[Register hot water demand point]

Register the Di terminal of the main unit or the communication adaptor that inputs the hot water demand

point when an external equipment is connected.

Select the Di terminal of the main unit or

communication adaptor from the list at

right (4-1) and touch [Select] (4-2).

Set the demand point (“HW Demand”).

You can change the names displayed for demand points.

Touch the text box and change with the touchscreen

keyboard. (Enter a name up to 16 alphanumeric

characters)

Touch [Register].

To cancel the settings, touch [Cancel].

Touch [System Settings] in “Settings”.

The “System settings” screen is displayed.

Touch [Hybrid GHP/EHP settings].

Enter the identification number (password level 1 or 2) and

the “Hybrid GHP/EHP settings” screen is displayed.

Touch [Register hotwtr demand point].

The “Register hot water demand point” screen is displayed.

Summary of Contents for CZ-256ESMC3







































































































































































































































Search results

Summary of Contents for CZ-256ESMC3

Reviews:

Related manuals for CZ-256ESMC3

Brands by name

Popular brands

Panasonic CZ-256ESMC3, Operating Instructions Manual

Search results

Summary of Contents for CZ-256ESMC3

Reviews:

Related manuals for CZ-256ESMC3

Brands by name

Popular brands