195
Configuring the Hybrid GHP/EHP
control
Setting
Using individually set upper limit maps
[Individual map settings]
You can use your own upper limit map to perform Hybrid GHP/EHP control.
y
If you have used this screen to make the setting to use an individual map, the Hybrid GHP/EHP control
mode settings made in the “Basic settings” screen (P.175) are not used, and the upper limit map made
with these settings is prioritised.
4
Put a check mark in “Use indiv. map”.
4
5
Touch [Register].
z
To cancel the settings, touch [Cancel].
5
6
Put a check mark in the “Select” column.
z
Select the load level to edit.
6
Continued on next page
1
Touch [System Settings] in “Settings”.
z
The “System settings” screen is displayed.
1
2
Touch [Hybrid GHP/EHP settings].
z
Enter the identification number (password level 1 or 2) and
the “Hybrid GHP/EHP settings” screen is displayed.
2
3
Touch [Individual map settings].
z
The “Individual map settings” screen is displayed.
3
