Panasonic CZ-256ESMC3 Operating Instructions Manual Download Page 182

Page: 182 / 230

182

Configuring the Hybrid GHP/EHP

control

Setting

Setting cost priority control

[Cost settings]

Make settings for power and gas costs used in cost priority control.

A day can be divided into a maximum of 5 time slots, and operation is optimised according to the power

costs and gas costs set for each time slot.

The values set for power costs and gas costs are used when calculating the ratio of power charges and

gas charges when using cost priority control.

This means that it doesn’t matter what the currency is, but it is necessary to match the scale of the

monetary value.

Put a check mark in the “Valid” column.

Select the time slot to use.

Set the power costs/gas costs.

The touchscreen numeric keypad appears when you touch

the text box.

Item

Explanation

Pow costs (cost/

kWh)

Set the unit price (0 to 999.99) for each

unit of energy.

This is used to calculate the power

charges when using cost priority

control.

Gas costs (cost/

kWh)

Set the unit price (0 to 999.99) for each

unit of energy.

This is used to calculate the gas

charges when using cost priority

control.

Continued on next page

Touch [System Settings] in “Settings”.

The “System settings” screen is displayed.

Touch [Hybrid GHP/EHP settings].

Enter the identification number (password level 1 or 2) and

the “Hybrid GHP/EHP settings” screen is displayed.

Touch [Cost settings].

The “Cost settings” screen is displayed.

Summary of Contents for CZ-256ESMC3







































































































































































































































Search results

Summary of Contents for CZ-256ESMC3

Reviews:

Related manuals for CZ-256ESMC3

Brands by name

Popular brands

Panasonic CZ-256ESMC3, Operating Instructions Manual

Search results

Summary of Contents for CZ-256ESMC3

Reviews:

Related manuals for CZ-256ESMC3

Brands by name

Popular brands