Panasonic CZ-256ESMC3 Operating Instructions Manual Download Page 49

Page: 49 / 230

Setting a schedule

Operation/Status

Changing the settings in setting cells

Select the setting cell to be changed

(1-1) in the “Detail setting” dialogue and

touch [Setting] (1-2).

The “Sttg” dialogue is displayed.

Change the settings.

Refer to step 6 on P.45 for the settings.

Touch [Register].

The settings are registered and the “Sttg” dialogue closes.

To cancel the settings, touch [Cancel].

Setting a schedule

Deleting the settings in setting cells

Select the setting cell to be deleted in

the “Detail setting” dialogue.

Touch [Delete].

The selected setting cell is deleted.

Summary of Contents for CZ-256ESMC3







































































































































































































































Search results

Summary of Contents for CZ-256ESMC3

Reviews:

Related manuals for CZ-256ESMC3

Brands by name

Popular brands

Panasonic CZ-256ESMC3, Operating Instructions Manual

Search results

Summary of Contents for CZ-256ESMC3

Reviews:

Related manuals for CZ-256ESMC3

Brands by name

Popular brands