Panasonic CZ-256ESMC3 Operating Instructions Manual Download Page 178

Page: 178 / 230

178

Configuring the Hybrid GHP/EHP

control

Setting

Enter the main outdoor unit and group

settings.

Item

Explanation

Main O/D unit

Set which of EHP and GHP will be

prioritised.

There is no affect on air conditioning unit

operation under normal control conditions.

This only has an affect on operation when

EHP upper limit and GHP upper limit are

both set to “Unlmtd” in individual map

settings.

Group settings

Set the group for referencing the value

sent when gas demand is input.

Touch [Register].

The settings are registered and the operation dialogue

closes.

To cancel the settings, touch [Cancel].

Put a check mark in the “Register”

column.

Select the outdoor units for which you want to implement

Hybrid GHP/EHP control. Hybrid GHP/EHP control

instructions are implemented only on those outdoor units

that have a check mark.

Touch [Register].

To cancel the settings, touch [Cancel].

Setting the control for each outdoor unit [Outdoor unit settings]

Summary of Contents for CZ-256ESMC3







































































































































































































































Search results

Summary of Contents for CZ-256ESMC3

Reviews:

Related manuals for CZ-256ESMC3

Brands by name

Popular brands

Panasonic CZ-256ESMC3, Operating Instructions Manual

Search results

Summary of Contents for CZ-256ESMC3

Reviews:

Related manuals for CZ-256ESMC3

Brands by name

Popular brands