Panasonic CZ-256ESMC3 Operating Instructions Manual Download Page 32

Page: 32 / 230

Check the operation and status of air conditioning units

Operation/Status

Checking the operational status of indoor units

Touch

when you want to

disconnect the USB memory device.

The message “USB memory can now be safely removed”

is displayed. Touch [OK] and then remove the USB

memory device.

Close the storage door after removing the USB memory

device.

Open the storage door and connect

a USB memory device to the USB

terminal.

Touch [CSV Output].

A confirmation screen is displayed.

Touch [OK].

The contents currently displayed is saved to the USB

memory device in CSV format.

When saving is complete, a message confirming that

saving is complete is displayed.

Outputting (saving) the displayed contents as a CSV file

The following screen is the “I/D unit information” screen.

CSV file output (saving) for “O/D unit information”, “I/D unit acc.”, “O/D unit acc.”, “Pulse acc.”, and

“Alarm log” is the same as for “I/D unit information”.

Summary of Contents for CZ-256ESMC3







































































































































































































































Search results

Summary of Contents for CZ-256ESMC3

Reviews:

Related manuals for CZ-256ESMC3

Brands by name

Popular brands

Panasonic CZ-256ESMC3, Operating Instructions Manual

Search results

Summary of Contents for CZ-256ESMC3

Reviews:

Related manuals for CZ-256ESMC3

Brands by name

Popular brands