Panasonic CF-37 Series Reference Manual Download Page 59

Page: 59 / 69

DMI Viewer

Select [DMI Viewer] from [Start] - [Programs] - [Panasonic]

The screen shown below is displayed.
When you click on an item, detailed information on that item will be displayed.

Running DMI Viewer

Input the file name (and select the folder) and select [Save]

This computer conforms to the specifications of the Desktop Management Interface
(DMI). The DMI Viewer can be used when you want to know information on the inter-
nal systems this computer supports, starting with the CPU and memory.

Click to close the DMI Viewer

Saving information to a file

Displayed information can be saved to a text file (.txt). Run the DMI Viewer and
display the information you wish to save.

To save all items

To save the item that is displayed

Select [Save All Data] from [File] menu.

Select [Save Selected Data] from [File] menu.

Summary of Contents for CF-37 Series






































































Search results

Summary of Contents for CF-37 Series

Reviews:

Related manuals for CF-37 Series

Brands by name

Popular brands

Panasonic CF-37 Series, Reference Manual

Search results

Summary of Contents for CF-37 Series

Reviews:

Related manuals for CF-37 Series

Brands by name

Popular brands