14
Function
Standby function
Hibernation function
Where data is saved to
Memory
Hard disk
Speed
Fast
Somewhat slow
Requires power supply
Yes
(if power is cut, all data is lost)
Power not required to maintain data
If you want to immediately start up and continue an application after shutting down your
computer, you can do so by using the standby or hibernation function.
Starting Up Your Computer Quickly
Standby/Hibernation Functions
Differences between the standby and hibernation functions
Setting the Standby or Hibernation Function
1
Select [Start] - [Settings] - [Control Panel] - [Power Options],
in [Hibernate] add the check mark for [Enable hibernate Sup-
port], then select [Apply]
2
In [Advanced], select [Standby] or [Hibernate] for [When I press
the power button on my computer], then select [OK]
The operation of the power switch and the operation of the computer when the
LCD is closed can be set in [Advanced].
NOTE
1
Run the Setup Utility
(
page 51
)
2
Using and , select [Power]
3
Using and , select [Power Switch] and press Enter
[Off] is factory set.
4
Press F10 , then select [Yes]
Using and , select [Suspend] or [Hibernation] and
press Enter
5
The Standby or Hibernation function can be set even with [Panel Switch] in the
Setup Utility.
page 55
NOTE
Windows NT
Windows 2000
