16
Resuming Operation
Slide the power switch
If the security indicator (
) is displayed, your password has been set.
When the computer enters the standby or hibernation mode by the closing of the
LCD panel, it will resume when the LCD panel is opened. If the computer does not
resume when the LCD panel is opened, slide the power switch.
CAUTION
After the display returns, the computer needs a short period of time to reinitialize.
This takes about 15 seconds. Do not shut down or restart Windows, or use
the standby or hibernation functions again during this time, as this may sub-
sequently cause Windows to operate abnormally.
Do not install or remove peripherals while your computer is in the standby or
hibernation mode; abnormal operation may result.
When operation resumes, serial devices such as a mouse, modem or PC
Cards may not function properly. In such cases, you will need to restart your
computer or reinitialize the individual devices.
Windows 2000
(a password set in the Setup Utility) does not appear when the computer
resumes from the standby or hibernation mode.
Standby/Hibernation Functions
