Panasonic AG-RCP30P Operating Instructions Manual Download Page 57

Page: 57 / 64

No.

Message

Measure

E28403 Media error.

Export incompleted.

Replace the P2 card or the USB

memory device.

E28404 USB storage file system error.

Couldn’t start export.

Replace the USB memory device.

E28405 USB storage write error.

Export incompleted.

E28406 Found update file in USB

storages.

Couldn’t start export.

Delete the update file on the USB

memory device.

E28407 No P2 cards.

Couldn’t start export.

Insert a P2 card with recorded files.

E28499 System error.

Export incompleted.

Reboot the Memory Card Video Recorder.

E28880 USB storage was ejected.

Export incompleted.

Do not remove the USB memory device

while exporting data. Reconnect the

USB memory device and export again.

E28881 USB storage was inserted.

Export incompleted.

Export the data again.

Error messages

(continued)

Summary of Contents for AG-RCP30P
































































Search results

Summary of Contents for AG-RCP30P

Reviews:

Related manuals for AG-RCP30P

Brands by name

Popular brands

Panasonic AG-RCP30P, Operating Instructions Manual

Search results

Summary of Contents for AG-RCP30P

Reviews:

Related manuals for AG-RCP30P

Brands by name

Popular brands