8
004778250 - 30/03/2020
6
892001893 - 19/12/2019
Pag. 5/18
0CAR6IN019147
PRIORITA’ INTEGRAZIONE LEGNA (impianti con puffer)
Dedicato per dare priorità alla integrazione con il Termocamino rispetto alla Caldaia a Gas.
Se
P10
=1 viene data priorità al termocamino a legna nella gestione dell’integrazione del puffer rispetto alla ca
ldaia a gas.
GESTIONE POMPE CON CONTROLLO PWM
Mediante i parametri
P18
e
P19
, è possibile abilitare e selezionare la modalità di funzionamento dei segnali PWM1 e PWM2,
per la gestione delle pompe previste negli impianti idraulici:
➢
PWM1:
P18 = 0
→ Disabilitato;
P18
= 1 → Manuale;
P18
= 2 →
Automatico
➢
PWM2:
P19 = 0
→ Disabilitato;
P19 = 1 → Manuale;
P19 = 2 →
Automatico
PWM Disabilitato:
Le pompe sono gestite
esclusivamente tramite l’uscita 230V
PWM Manuale:
Il duty cycle del PWM che determina la velocità delle pompe, è impostato tramite i parametri:
➢
U06 se PWM1 con profilo Heating
(Pompa termocamino)
➢
U16 se PWM2 con profilo Heating
(Pompa riscaldamento)
➢
U26 se PWM2 con profilo Solar
(Pompa collettore solare)
PWM Automatico:
In relazione alla tipologia di pompa, il duty cycle del PWM è calcolato sulla base della temperatura delle sonde
termocamino, puffer alto o collettore solare
e può variare all’interno di questi range:
➢
Tra U01 e U02 se PWM1 con profilo Heating (
es. 85 ÷ 5 %)
➢
Tra U11 e U12 se PWM2 con profilo Heating (
es. 85÷ 5 %)
➢
Tra U21 e U22 se PWM2 con profilo Solar
(
es. 15 ÷ 95 %)
Il cambio di velocità della Pompa Termocamino è abilitato
all’interno di questo range di temperatura
:
➢
Tra A01 e A01+A80 in gestione riscaldamento (
es. se A01=35°C, A80=20°C allora range: 35 ÷ 55 °C
)
➢
Tra A01 e A01+A81 in gestione sanitario
(
es. se A01=35°C, A81=15°C allora range: 35 ÷ 50 °C
)
Il
cambio velocità della Pompa Riscaldamento è abilitato all’interno di questo range di temperatura
:
➢
Tra A04 e A04+A82
(
es. se A04=45°C, A82=20°C allora range: 45 ÷ 65 °C
)
oppure se è presente il puffer
➢
Tra A17 e A17+A82
(
es. se A17=45°C, A82=20°C allora range: 45 ÷ 65 °C
)
Il cambio velocità della Pompa Collettore Solare è abilitato all’interno di questo range di temperatura
:
➢
Tra A33 e A33+A82
(
es. se A33=45°C, A82=20°C allora range: 45 ÷ 65 °C
)
Il profilo del segnale PWM, Heating o Solar, è selezionato in automatico sulla base della pompa da gestire e di seguito sono
riportati i profili delle pompe in commercio:
Profilo HEATING
Sulla base di questo profilo è consigliabile
impostare i parametri del duty cycle del PWM
come di seguitio riportato:
PWM1
Vmin: U01 <= 85%
Vmax: U02 >= 5%
PWM2
Vmin: U11 <= 85%
Vmax: U12 >= 5%
5.18
5.19
5.18
5.19