![background image](http://html2.mh-extra.com/html/palazzetti/glh110/glh110_installation-user-and-maintenance-manual_3316682023.webp)
004778250 - 30/03/2020
23
ENGLISH
0CAR6IN019147
GLH110 Glass
Temperature Controller
User Manual
1. MAIN FEATURES
The
GLH110
Temperature Controller manages Wood Fireplaces and Boilers, for heating and domestic hot water production, with the
possibility to integrate it to a Gas Boiler.
Safety Rules
Read carefully the following safety regulations, in order to prevent accidents to
people and things.
Before working on the hydraulic plant, please be aware of the following:
Accident prevention measures
Environmental protection measures
National Institute for Work accidents measures
Recognized prevention measures
This manual is intended for qualified technical staff only
Electrical wiring and connection must be performed by qualified
technicians only
The first installation of the hydraulic plant must be performed expert
personnel
Declaration of Conformity
Regulations:
EN 60730-1 50081-1
EN 60730-1 A1 50081-2
Technical data
Supply:230 Vac 50 Hz
10%
Absorption:2,5 VA
Outputs Range:5A 250 Vac
Internal fuse:3,15 A
Mechanical Characteristics
Material: PA
Flush mount Installation: 3 Modules/ Wall
Dimensions:Flush mount: 132x68x50 mm
Degree of Protection:IP40
Installation conditions and Use
Operating Temperature: 0÷40 °C
Storage Temperature:0 ÷ 60 °C
Umidity: 85% @25°C
2. INSTALLATION
Make sure that the Main Power Supply is OFF, before installing the device
Install the product in a dry environment with proper climatic conditions
Insert a bipolar main switch compliying to local regulations
Avoid coupling the probe cables with these of power
Use for wiring, cables with conductors of appropriate section and in according the rules
Position the probes to detect correctly the temperature
Make sure the probe wires are placed away from direct/indirect flame
3. ELECTRICAL CONNECTIONS
All the probe inputs and command outputs are controlled
automatically according to the type of hydraulic/plumbing
plant selected.
For electrical connections
you must refer to Chapter 7 and the following paragraphs
concerning the hydraulic/plumbing schematic drawings.
Fig.2
–
Electrical connections
Code
Connectors
Device
Characteristics
IN
PUT
S
LINE
1
–
2
Voltage Supply
230 Vac 50 Hz
10%
S1
13
–
14
Fireplace Temperature Probe
Operating Range: -50°C ÷ 125 °C
NTC 10K Measure: -10 ÷ 110 °C
1°C
NTC 100K Measure: -10 ÷ 300 °C
1°C
PT 1000 Measure: -40 ÷ 300 °C
1°C
Flow switch or Level switch contact ON/OFF
S2
15
–
16
Sanitary (DHW) Boiler /Buffer Probe/
Heating Return
Flow Switch
S3
16
–
17
Ambient Probe/Thermostat
Buffer, Collector Panel/Level switch
16
–
17
–
18
Pressure Sensor
Operating Range: 0 ÷3 bar / 0 ÷ 3V
O
U
TP
U
TS
P1
3
–
4
Pump 1
230 Vac 5A
P2
5
–
6
–
7
Diverter Valve / Pump 2
230 Vac 5A
P3
8
–
9
–
10
Boiler Integration Consent
Contact in exchange: COM.(9)-N.O.(8) - N.C.(10)
P4
11 - 12
Service = Thermostat
230 Vac 5A
Service = Grill
Combustion Air Damper
Pump 2
PWM1
19
–
16 o 14
Control PWM1
0-5Vdc, Frequency 1Khz, Duty Cycle 0-100%
PWM2
20
–
16 o 14
Control PWM2