46
004778250 - 30/03/2020
5.18
PRIORITÄT HOLZINTERGRATION (Anlagen mit Puffer)
Der Integration mit dem Heizkamin wird Vorrang vor dem Gaskessel eingeräumt.
Wenn
P10
=1 hat der holzbeheizte Thermo-Kamin Vorrang vor dem Gaskessel, wenn es um die Integration des Puffers geht.
5.19
VERWALTUNG DER PUMPE MIT STEUERUNG PWM
Mithilfe der Parameter P18 und P19 ist es möglich, die Betriebsart der Signale PWM1 und PWM2 für die Steuerung von
Pumpen in Hydrauliksystemen zu aktivieren und auszuwählen:
PWM1: P18 = 0 → Deaktiviert;
P18 = 1 → Manuell; P18 = 2 → Automatisch
PWM2: P19 = 0 → Deaktiviert;
P19 = 1 → Manuell;
P19 = 2 → Automatisch
PWM Deaktiviert:
Die Pumpen werden ausschließlich über den 230V-PWM-Manuellen Ausgang gesteuert:
Der Duty Cycle des PWM, der die Pumpendrehzahl bestimmt, wird über die Parameter eingestellt:
U06 wenn PWM1 mit Heizprofil
(Thermo-Kamin-Pumpe)
U16 wenn PWM2 mit Heizprofil
(Heizpumpe)
U26 wenn PWM2 mit Solar-Profil
(Pumpe Saller Solar)
PWM Automatisch:
Je nach Pumpentyp wird der PWM-Duty Cycle auf Basis der Temperatur der Thermo-Kamin-, Hochpuffer- oder
Solarsammlersonden berechnet und kann innerhalb dieser Bereiche variieren:
Zwischen U01 und U02 wenn PWM1 mit Heizprofil (
z.B. 85 ÷ 5 %)
Zwischen U11 und U12 wenn PWM2 mit Heizprofil (
z.B. 85÷ 5 %)
Zwischen U21 und U22 wenn PWM2 mit Solar-Profil (
z.B. 15 ÷ 95 %)
Die Drehzahländerung der Thermo-Kaminpumpe ist innerhalb dieses Temperaturbereichs möglich:
Zwischen A01 und A01+A80 in Heizungsverwaltung (
z.B. wenn A01=35 °C, A80=20 °C mit Bereich: 35 ÷ 55 °C
)
Zwischen A01 und A01+A81 in Sanitärverwaltung (
z.B. wenn A01=35 °C, A81=15 °C mit Bereich: 35 ÷ 50 °C
)
Die Drehzahländerung der Heizpumpe ist innerhalb dieses Temperaturbereichs möglich:
Zwischen A04 und A04+A82
(
z.B. wenn A04=45 °C, A82=20 °C mit Bereich: 45 ÷ 65 °C
)
oppure se è presente il puffer
Zwischen A17 und A17+A82
(
z.B. wenn A17=45 °C, A82=20 °C mit Bereich: 45 ÷ 65 °C
)
Die Drehzahländerung der Solarsammlerpumpe ist innerhalb dieses Temperaturbereichs möglich:
Zwischen A33 und A33+A82
(
z.B. wenn A33=45 °C, A82=20 °C mit Bereich: 45 ÷ 65 °C
)
Das PWM-Signalprofil, Heizung oder Solar, wird automatisch entsprechend der zu verwaltenden Pumpe ausgewählt, und
darunter befinden sich die Profile der auf dem Markt befindlichen Pumpen:
Profil HEATING
Basierend auf diesem Profil empfiehlt es sich, die
PWM-Duty-Cycle-Parameter wie folgt einzustellen:
PWM1
Vmin: U01 <= 85%
Vmax: U02 >= 5%
PWM2
Vmin: U11 <= 85%
Vmax: U12 >= 5%
6