84
004778250 - 30/03/2020
PRIORIDAD DE INTEGRACIÓN DE LA MADERA (sistemas con puffer)
Dedicado a dar prioridad a la integración con la Termochimenea respecto la Caldera de Gas.
Si
P10
=1, se da prioridad a la termochimenea de madera en la gestión de la integración del puffer sobre la caldera de gas.
GESTIÓN DE BOMBAS CON CONTROL PWM
Utilizando los parámetros
P18
y
P19
, es posible activar y seleccionar el modo de funcionamiento de las señales PWM1 y PWM2, para la
gestión de las bombas previstas en los sistemas hidráulicos:
➢
PWM1:
P18 = 0 → Desactivado;
P18 = 1 → Manual;
P18 = 2 → Au
tomático
➢
PWM2:
P19 = 0 → Desactivado;
P19 = 1 → Manual;
P19 = 2 → Automático
PWM Desactivado:
Las bombas son gestionadas exclusivamente a través de la salida de 230V
PWM Manual:
El ciclo de trabajo del PWM que determina la velocidad de las bombas se establece utilizando los parámetros:
➢
U06 si PWM1 con perfil Calefacción (Bomba termochimenea)
➢
U16 si PWM2 con perfil Calefacción (Bomba calefacción)
➢
U26 si PWM2 con perfil Solar (Bomba colector solar)
PWM Automático:
En relación al tipo de bomba, el ciclo de trabajo del PWM se calcula en función de la temperatura de las sondas de la termochimenea,
puffer alto o colector solar y puede variar dentro de estos rangos:
➢
Entre U01 y U02 si PWM1 con perfil Calefacción
(
por ejemplo, 85 ÷ 5%)
➢
Entre U11 y U12 si PWM2 con perfil Calefacción
(
por ejemplo, 85÷ 5%)
➢
Entre U21 y U22 si PWM2 con perfil Solar
(
por ejemplo, 15 ÷ 95%)
El cambio de velocidad de la Bomba Termochimenea está activado dentro de este rango de temperatura:
➢
Entre A01 y A01+A80 en la gestión de la calefacción
(
por ejemplo, si A01=35 °C, A80=20 °C, entonces el
rango: 35 ÷ 55 °C
)
➢
Entre A01 y A01+A81 en la gestión sanitario
(
por ejemplo, si A01=35°C, A81=15°C entonces rango: 35
÷ 50 °C
)
El cambio de velocidad de la Bomba de Calefacción está activado dentro de este rango de temperatura:
➢
Entre A04 y A04+A82
(por ejemplo, si A04=45 °C, A82=20 °C, entonces rango:
45 ÷ 65 °C
)
o si el puffer está presente
➢
Entre A17 y A17+A82
(
por ejemplo, si A17=45 °C, A82=20 °C, entonces rango:
45 ÷ 65 °C
)
El cambio de velocidad de la Bomba Colector Solar está activado dentro de este rango de temperatura:
➢
Entre A33 y A33+A82
(por ejemplo, si A33=45 °C, A82=20 °C, entonces rango:
45 ÷ 65 °C
)
El perfil de la señal PWM, Calefacción o Solar, se selecciona automáticamente en función de la bomba a gestionar y los perfiles de las
bombas en el mercado se muestran a continuación:
Perfil de CALEFACCIÓN
En base a este perfil, es aconsejable establecer los
parámetros del ciclo de trabajo del PWM de la
siguiente manera:
PWM1
Vmín: U01 <= 85%
Vmáx: U02 >= 5%
PWM2
Vmín: U11 <= 85%
Vmáx: U12 >= 5%