Danaher Motion S20630, Installation Manual

Page: 1 / 109

S200 Position Node with CANOpen/
DeviceNet
Installation Manual
M-SS-S2-11
Revision J June 25 2007
Keep all product manuals as a product component during the life span of the servo amplifier.
Pass all product manuals to future users/owners of the servo amplifier.
NOTICE:
1.) This S200 Option requires the use of special user interface software called S200 OC Tools. This
software can be installed using the included CD ROM. This device will not communicate with the
standard S200 Tools software.
2.) Common Problems
a.) If all dip switches are set to ON (Toggled to the right), the unit enters a perpetual rest state and
does not communicate. Change dip switch settings.
b.) When selecting a non-SFD motor, be certain to enter the ‘motor poles’ data.
c.) Always remember to Save the configuration to Non-volatile memory.
d.) Remember that COLDSTART is required before using the drive after changing I/O configuration.
Helping you build a better machine faster.