Pacific Power Source LMX Series, Operation Manual

Page: 306 / 463

LMX SERIES™ OPERATION MANUAL
SECTION 8:
Remote Control Programming
Entire Contents Copyright

2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual Page 306 of 463
Command Syntax [SOURce:]PULSe <cr>
>>> Alias for PROGram:TRANsient command. <<<
Description This command controls pulse transient execution
Parameters < RUN | STOP | PAUSe | STEP | RESTart >
Parameter Format <cr>
Example PULS RUN
Query Format [SOURce:]PULSe?
Description Query format returns the pulse transient execution state as either
RUN, STOP, PAUS, STEP or REST
Returned Data Format <nr1>
Return values respresent running state as follows:
0 Stopped
1 Running
2 Paused
3 Stepping
4 Waiting for trigger
Query Example PULS?
1
Command Syntax [SOURce:]PULSe:LOAD
Description This command converts the pulse transient definition to the power
source’s regular transient segment format and loads it in the
controller real-time memory for execution.
Parameters None
Parameter Format n/a
Example STEP RUN
Query Format
[SOURce:]PULSe:LOAD?
Description Query format returns a 1 if the pulse transient load operation was
successful, otherwise returns 0.
Returned Data Format <nr1>
Return values respresent:
0 Load Failed
1 Load completed
Query Example STEP?
1