LMX SERIES™ OPERATION MANUAL
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
Page 162 of 463
Show Measurements in Immediate Mode
When checked, entering immediate mode will
result in the Measurement screen being display
with the changing parameter showing in the
title bar. This allows monitoring of all output
measurements while slewing voltage, current of
frequency.
Enable variable speed shuttle knob
When selected, the speed of rotating the
shuttle knob will increase the step size of the
parameter being changed. If unchecked,
changes occur at a fixed step size (resolution).
Set step with numeric keypad
When set, the numeric keypad can be used to
increment or decrement the step size of the
shuttle knob. Digits 9 to 1 our use to change
from largest step size (9) to smallest step size
(1) and any step size in between.
The following soft keys are available from the LOCAL INTERFACE setup screen:
SOFT KEY
Description
Local Inter. Page 2.
(SK1)
Toggle to LOCAL INTERFACE 2 OF 2 screen
-
-
-
Back (SK5)
Returns to previous screen
Table 6-28: Available USER INTERFACE screen soft keys
