Pacific Power Source LMX Series, Operation Manual

Page: 250 / 463

LMX SERIES™ OPERATION MANUAL
SECTION 8:
Remote Control Programming
Entire Contents Copyright

2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual Page 250 of 463
Command Syntax [SOURce:]VOLTage[:AC]#:SLEW
Description Sets AC voltage slew rate for phase # in Volts per msec. If # is
omitted, sets phase A slew rate to value specified.
Parameters Range 0.01 – 300.0
Parameter Format <nr2> and <nr3>
Example VOLT:AC1:SLEW 300.00
Query Format [SOURce:]VOLTage[:AC]#:SLEW?
Description Returns voltage slew rate setting for specified phase. If phase is
omitted, returns voltage setting for phase A.
Returned Data Format <nr2>
Query Example VOLT:AC1:SLEW?
300.0000
Command Syntax [SOURce:]VOLTage[:AC]:LIMit:MINimum
Description Sets low user limit for AC voltage programming. User limits must fall
within actual hardware limits of the power source. Also, MIN limit
must be less than MAX limit.
Parameters 0.000 – 300.000
Parameter Format <nr2>
Example VOLT:LIM:MIN 20.0
Query Format
[SOURce:]VOLTage[:AC]#:LIMit:MINimum?
Returned Data Format <nr2>
Query Example VOLT:LIM:MIN?
20.0000
Command Syntax [SOURce:]VOLTage[:AC]:LIMit:MAXimum
Description Sets high user limit for AC voltage programming. User limits must fall
within actual hardware limits of the power source. Also, MAX limit
must be greater than MIN limit.
Parameters 0.000 – 300.000
Parameter Format <nr2>
Example VOLT:LIM:MAX 240.0
Query Format [SOURce:]VOLTage[:AC]#:LIMit:MAXimum?
Returned Data Format <nr2>
Query Example VOLT:LIM:MAX?
240.0000
Query Format [SOURce:]VOLTage[:AC]#:LIMit:RANGe?
Description Returns available AC voltage range low and high limits.
Returned Data Format <nr2>,<nr2>
Query Example VOLT:AC1:LIM:RANG?
0.0000,300.0000