Pacific Power Source LMX Series, Operation Manual

Page: 221 / 463

LMX SERIES™ OPERATION MANUAL
SECTION 8:
Remote Control Programming
Entire Contents Copyright

2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual Page 221 of 463
Query Format MEASure:SPECTrum:VOLTage#:PHASe?
Description Same as “MEASure:SPECTrum:PHASe?” but selects voltage and phase
#. Returns phase angles in degrees for the most recent voltage
spectrum query. Returns a data set of 51, <nr2> type numbers,
comma delimited. The 1 st element is the phase angle of the
fundamental, for reference. The 2 nd element is the phase angle of the
2 nd harmonic, etc.
Returned Data Format <nr2>, <nr2>, <nr2>,……, <nr2>
Query Example MEAS:SPECT:VOLT1:PHAS?
0.000, 20.000, 30.000…., 0.000
Query Format MEASure:SPECTrum:VLL#:PHASe?
Description Same as “MEASure:SPECTrum:PHASe?” but selects Line to Line
voltage and phase #. Returns phase angles in degrees for the most
recent voltage spectrum query. Returns a data set of 51, <nr2> type
numbers, comma delimited. The 1 st element is the phase angle of the
fundamental, for reference. The 2 nd element is the phase angle of the
2 nd harmonic, etc.
Returned Data Format <nr2>, <nr2>, <nr2>,……, <nr2>
Query Example MEAS:SPECT:VLL1:PHAS?
0.000, 20.000, 30.000…., 0.000
Query Format MEASure:SPECTrum:CURRent#:PHASe?
Description Same as “MEASure:SPECTrum:PHASe?” but selects current and phase
#. Returns phase angles in degrees for the most recent current
spectrum query. Returns a data set of 51, <nr2> type numbers,
comma delimited. The 1 st element is the phase angle of the
fundamental, for reference. The 2 nd element is the phase angle of the
2 nd harmonic, etc.
Returned Data Format <nr2>, <nr2>, <nr2>,……, <nr2>
Query Example MEAS:SPECT:CURR:PHAS?
0.000, 20.000, 30.000…., 0.000
Query Format MEASure:SPECTrum:THD?
Description Returns Total Harmonic Distortion of the most recent
:MEASure:SPECTrum:parameter command
Returned Data Format <nr2>
Query Example MEAS:SPECT:THD?
2.5600
Query Format MEASure:SPECTrum:VOLTage#:THD?
Description Same as “MEASure:SPECTrum:THD?” but selects voltage and phase
#.Returns Total Harmonic Distortion of the selected phase voltage.
Returned Data Format <nr2>
Query Example MEAS:SPECT:VOLT1:THD?
2.5600