LMX SERIES™ OPERATION MANUAL
SECTION 8:
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
Page 302 of 463
Query Syntax
[SOURce:]PULSe:RAMP:MINimum?
Description
This command returns the minimum permissible set value for the
PULSE ramp time.
Returned Data Format
<nr2>
Query Example
PULS:RAMP:MIN?
Query return values for MINimim, MAXimum and DEFault are dependent on
MODE and interdependent parameter value settings
Query Syntax
[SOURce:]PULSe:RAMP:MAXimum?
Description
This command returns the maximum permissible set value for the
PULSE ramp time.
Returned Data Format
<nr2>
Query Example
PULS:RAMP:MAX?
Query return values for MINimim, MAXimum and DEFault are dependent on
MODE and interdependent parameter value settings
Query Syntax
[SOURce:]PULSe:RAMP:DEFault?
Description
This command returns the default setting for the PULSE ramp time.
Returned Data Format
<nr2>
Query Example
PULS:RAMP:DEF?
Query return values for MINimim, MAXimum and DEFault are dependent on
MODE and interdependent parameter value settings
Command Syntax
[SOURce:]PULSe:VOLTage[:AC]# < nr2 >, <cr>
[SOURce:]PULSe:VOLTage[:AC] #
Voltage phase A, OPT: Voltage phase B, OPT: Voltage phase C, OPT
Description
This command sets the PULSE voltage for selected phase # or for all
phases if phase reference is omitted.
Parameters
Voltage , < NORmal | SATurate >
Default is NORmal if optional second parameter is omitted.
Parameter Format
<nr2>, <cr>
Example
PULS:VOLT1 230.00, SAT
Query Format
[SOURce:]PULSe:VOLTage[:AC]#?
Returned Data Format
<nr2>
Query Example
PULS:VOLT1?
230.0000
Query Syntax
[SOURce:]PULSe:VOLTage[:AC]#:MINimum?
Description
This command returns the minimum permissible set value for the
PULSE voltage for selected phase # or for all phases if phase
reference is omitted
Returned Data Format
<nr2>
Query Example
PULS:VOLT1:MIN?
0.0000
