3
IRIDASFramecyclerPro(2009orhigher)
Start the software.
Search for the sequence. If necessary, click "Desktop" at the bottom left to show the folder
structure. (The selection is selected or deselected using "Desktop".)
Select the folder. The files in it are displayed on the right as thumbnails.
Select the sequence. Hover the cursor over a thumbnail, then click the plus symbol that appears
and load the sequence into the timeline. Click "Desktop" again to close the desktop selection.
Colour correction/grading. Click "Global Grading" (located above the timeline on the right)
to open the Grading Tool window.
Adjust the contrast, brightness, hue and offset as desired using the various faders.
Render. Click the "Render" button at the bottom centre to call up the Render window.
(You can use it to select or deselect the Render window.)
Configure settings. In the Render window, use the tabs and the corresponding drop-down
menus to select the desired format.
Specify the path and file name. Single-clicking "Render" in the Render window opens a window
with the file structure. Here, specify the path and the desired filename.
Start rendering. To do so, click "Render" at the bottom right in the Render window with the file
structure.
IRIDASSpeedGrade(2009)
Start the software.
Search for the sequence. If necessary, click "Desktop" at the bottom left to show the folder
structure. (The selection is selected or deselected using "Desktop".)
Select the folder. The files in it are displayed on the right as thumbnails.
Load the sequence. Hover the cursor over a thumbnail, then click the plus symbol that appears
and load the sequence into the timeline. Click "Desktop" again to close the desktop selection.
Colour correction/grading. Click "Global Grading" (located above the timeline on the right) to
open the Grading Tool window.
Adjust the contrast, brightness, hue, offset etc. as desired using the various faders.
You can make more in-depth image adjustments using the "Highlights", "Midtones" and "Shadows"
buttons on the left side and the "Secondaries" and "Mask" buttons on the right side of the sub-
menus.
Render. Single-click "Render" to open the rendering mask.
The "Render" button is at the bottom centre; you can use it to select or deselect the rendering
mask.
Path and file name. In the rendering mask, enter the path and file name under "Destination".
File format. Under the "Format" menu item, you can select a default format using the drop-
down menu or create your own by clicking "Other...". Select the desired settings using the
"Options" menu item.
Render. To start the conversion, click the "Render" button under the "Render" menu item.
1.
2.
3.
4.
5.
6.
7.
8.
9.
1.
2.
3.
4.
5.
6.
7.
8.
9.
