25
2
Functional De
scrip
tion
Adjusting white balance for HD-SDI stream
(output)
White balancing can be accomplished more quickly using the Hand Unit HU-2 and WEISS-
CAMware. This requires that the camera be in record mode/Live Image mode.
The white balance adjustment is carried out on a white surface which must fill at least 60 percent
of the image area. The luminance of the white should be 50 percent.
A)Standaloneversion
Switch the camera to REC./Live Image mode: On the Hand Unit HU-2, select the "TIMELINE"
field/button in the main menu to access its submenu.
Switch the camera to record mode by pushing the red record field/button.
Select "CLOSE" at the upper right to return to the main menu. The recording/Live Image con-
tinues to run.
Select the "IMAGE CONTROL" field/button in the main menu to access its submenu.
Make sure that sufficient white is within the image area.
Push the field/button "Auto White" once. The white balance adjustment takes place automatically,
and the results appear in the image immediately.
Select "CLOSE" at the upper right to return to the main menu. The balance is saved automati-
cally until changed or until the camera is switched off.
(Note: The camera is still in operation.)
Record/Live Image mode can be stopped at any time from the "TIMELINE" menu.
B)Basic-IT-basedversion
Switch the camera to REC./Live Image mode. -> In the WEISSCAMware "Timeline" window,
click the red record button.
Make sure that sufficient white is within the image area.
Click the field/button "Auto white". The white balance adjustment takes place automatically,
and the results appear in the image immediately.
Tip:Alternatively,thewhitebalancecanbeadjustedmanuallybymodifyingtheRGBvalues.
Thesevaluescanbestoredusing"SaveLUT".
Note: The camera is still running – you can continue work immediately if desired.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
