20
Hand Unit HU-2
(for stand alone version)
To switch on the WEISSCAM Hand Unit HU-2, hold the blue ON/OFF button on the left side
pressed for one second.
If everything is wired properly and supplied with power,
the Hand Unit HU-2 boots up and the
WEISSCAM Software is started and automatically detects the camera.
The WEISSCAM HS-2 logotype appears in the window frame on the right side next to CamType.
If "
NoCamera
", is displayed instead of "
WEISSCAMHS-2
", there is no connection and the camera
cannot be controlled.
For potential causes and solutions, refer to the "Troubleshooting" chapter.
