29
2
Functional De
scrip
tion
2.2.3 Download Settings
Copying a sequence to a recorder
In the stand alone version of the WEISSCAM HS-2, the data in RAM are transferred to a hard disk,
flash or tape recorder via single or dual link.
In the Basic IT-based version, data can be transferred to a PC systems in various file formats
(TIFF, DPX, RAW) via gigabit Ethernet or USB.
A)Standaloneversion
Ensure that the cable (single/dual link) between the camera and recorder are connected properly.
Check that the desired range of the sequence is enclosed (marked) between the two markers.
When copying HD data (YCbCr 4:2:2), use the HEX switch on the camera to select the desired
debayer algorithm (look), or chose by loading a HEX file frm the Hand Unit HU-2.
On the Hand Unit HU-2, press the "Save Marker" field/button.
The transfer of the selected range begins.
On the recorder, start the recording manually. (Note that the WEISSCAM DigiMag has a two-
second delay after you press the RECORD button before it starts recording. For this reason,
adjust the "In point" of the sequence to be copied accordingly.)
After the end of the selected range has been reached, the transfer stops automatically.
On the recorder, stop the recording manually.
B)Basic-IT-basedversion
FortransfertoaPCsystemviagigabitEthernetorUSB:
Ensure that the cable (gigabit Ethernet or USB) between the camera and PC system is con-
nected properly.
Check that the desired range of the sequence is enclosed (marked) between the two markers.
Before transferring the data, specify the path, filename and take number under "File Manage-
ment" in the Settings window. In addition, the file format to be written and the algorithm to be
used must be selected.
To start the data transfer, click the "Save Marker" button in the "Timeline" window.
When the download starts, an information window appears showing the progress.
When the transfer is complete, the information window closes and the camera is ready for the
next recording.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
