28
Stopping recording and starting playback
Depending on the REC. modes, the recording must be stopped manually or stops by itself.
In the recommended "Ring Buffer" mode, the recording should be stopped manually immediately
after the action.
A)Standaloneversion
If you have not done so already, switch to the "TIMELINE" menu of the Hand Unit HU-2.
(In the main menu by pressing the "TIMELINE" field/button)
Stop the recording by pressing the Stop field/button in the display or the white Stop Hard button.
The camera is now ready to play back the last recording.
You can start the playback immediately by pressing the Play field/button.
–
To limit the range for playback, set "Cut In" and "Cut Out" markers.
– In order to jump to the markers just move the cursor to the white arrows over or below the
timeline.
–
By pressing "Loop Marker", you can start a loop playback between the markers.
–
Press "Delete Marker" to remove the markers.
B)Basic-IT-basedversion
Stop the recording by clicking the Stop button (or the "Enter" shortcut).
The camera is now ready to play back the last recording.
You can start the playback immediately by clicking the Play button.
–
To limit the range for playback, stop playback and set markers using "Cut In" and "Cut Out".
– In order to remove the markers press short cut “M“ to select a pair of markers. Now press
“Delete marker” remove them.
1.
2.
3.
1.
2.
