30
2.2.4 WEISSCAM Format OVerview
The WEISSCAM HS-2 stand alone camera can output simultaniously an HD- and a RAW stream
through HD-SDI connection.
WEISSCAM HD Data Transfer
1:1mode(“STANDARDRAWMODESL”)
HD OUT:
Standard transfer (single link)
1080 24psf - on LINK A and LINK B identical singal output
1080 25psf - on LINK A und LINK B identical singal output
1080 30psf - on LINK A und LINK B identical singal output
2:1mode(“FASTRAWMODESL”)
HD OUT:
Transfer in higher data rate (single link at 50i or dual stream at 50p)
1080 50i - on LINK A and LINK B identical singal output (YCbCr 4:2:2).
Each recorded full frame is converted into a half image. The actual playback speed is doubled
that way.
1080 50p
-
on dual stream; camera and recorder must be connected on LINK A and LINK B
with two cables of same length and grade.
Each cable transfers “one half” of the image as a 50i signal. The two 50i stream together form
the 50p image. The resepective recorder must be capable of dual stream recording.
Attention:
InthismodeRAW50pisconnectedwithsinglelink,HDwithdualstream.
To receive the signal on the HD output of the camera, chose the appropriate setting (
50isingle
link”or“50pdualstream”
) in the Hand Unit HU-2 in the “SETTINGS” window behind “Output“
.fghDP/DI YCbCr 4:2:2 10-bit 1920 x 1080 p/i
6.528 Kb
Single link
.fghMP
YCbCr 4:2:2 10-bit 1920 x 1080 p HighSpeed
12.288 Kb
Dual link
–
–
–
–
–
