2
Starting a recording
By using "Ring Buffer" mode, it is possible to keep the camera recording continuously, and to
adjust the "Live Image" as needed. Changes to the Image Control via the Hand Unit HU-2 or the
HEX switch can be tested directly
A)Standaloneversion
Check that all preconfigured settings are correct. (Format, frame rate, shutter speed,
REC. mode)
In the main menu of the Hand Unit HU-2, touch the "TIMELINE" field/button to open its sub-
menu.
Start recording by pressing either the red record field/button on the display, or the red record
hardware button.
Recording begins.
Tip:Fourfeaturesindicatethatrecordinghasbegun:
1.Thewhitelineofthetimelineextendstowardstheright,thusindicatingtheprogress
oftherecording.
– InSequencemode,therecordingisstoppedautomaticallyattheend.
– InRingBuffermode,therecordingcontinuesuntilmanuallystopped.
2.Theframecounter(image)countstherecordedframesuptothemaximumcapacity
oftheRAM,“Rec”isshownintheinfobox.
3.Aliveimageisdisplayed.
4.Thereddotinthestatuslineblinkswhilerecordinguntiltherecordingisstopped.
B)Basic-IT-basedversion
Check that all preconfigured settings are correct. (Format, frame rate, shutter speed,
REC. mode)
In the timeline window, start recording by clicking the red record button
(or by pressing the "R" shortcut).
Recording begins. (Timeline progress, red flashing in timecode, frame counter counts.)
1.
2.
3.
1.
2.
3.
